Nickel Plating Plant Nickel Plating Equipment

1. Technological process of production

pay off→cathode discharge oil→water rinsing→anode discharge oil→water rinsing → pickling→ water rinsing → pre-plating nickel →recycling→ water rinsing → nickel plating → recycling→water rinsing → hot water rinsing → drying→protection→drying→take up

2. Main process introduction

Cathode discharge oil: remove the oil on the surface of copper wire to ensure the binding force of the coating .

Anode discharge oil: same as the cathode discharge oil.

Pickling: remove the oxide from the surface of the product.

Water rinsing: clean the product thoroughly after the tank to avoid mutual contamination of the tank.

Pre-nickel plating : as a pre-coating, to ensure the subsequent coating and base binding force.

Nickel plating : thickened nickel coating.

Protection:It has a rust proof sealing effect and does not affect the appearance, weldability, conductivity, and other properties of the coating.

3. Solution preparation

Pre-nickel plating solution: Ni(SO₃NH₂)₂ 400~600mL/L
NiCl₂ 5~15g/L
H₃BO₃ 40~60g/L

Nickel plating solution: Ni(SO₃NH2)₂ 400~600mL/L
NiCl₂ 5~15g/L
H₃BO₃ 40~60g/L
Softening agent 8~12mL/L
Brightening agent 0.2~0.8mL/L

4. Packaging & Shipping

We can pack it by pallet, or according to the customers' specific requirements.

Port: Shanghai/Ningbo

5. Our Services

In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been widely used in electroplating area.

Any doubt please contact us.